Jump to content
  • advertisement_alt
  • advertisement_alt
  • advertisement_alt

Striking target for strengthening


Bobfromtekken

Recommended Posts

Hey all, I was looking for some input/advice about a striking target I'd like to put together in a limited space.

I've recently moved into a new place and am setting up a training area for myself in the basement. My space is pretty limited, and I've set aside enough room for essentials. But in the middle of it all is a foundation pole, and I'm trying to come up with the best way to utilize it. I have my mind set on a makiwara-esque striking target.

The pole is floor to ceiling and made of steel. My current thought is to put padding on it and wrap it with hemp rope, but I've never set up a target like this before. I've done strengthening before with mung bean bags, rice bags, and rice digging, but nothing quite like this.

I was hoping you guys with more experience with these sorts of things would have some advice as to what padding/surface I should use for my mini project

Link to comment
Share on other sites

  • advertisement_alt
  • advertisement_alt
  • advertisement_alt

Welcome to the forum Bob. Sounds like you got yourself a makiwara. That's good!

The only thing I can think of is the Shaolin newspaper on the wall. A thick layer of paper on the wall for you to hit. Of should not take room since it's on the wall

I will check it out to see if I can come up with other ideas.

It begins with the knowledge that the severity of a strikes impact is amplified by a smaller surface area.

Link to comment
Share on other sites

  • 4 weeks later...

What you're describing would be akin to an ude-makiwara, but without any spring action. You can use it for conditioning, if you're careful, but it's not really a makiwara. A better bet would be to build a proper makiwara on a platform, that way it's moveable and not permanently bolted to the floor or anything.

Kishimoto-Di | 2014-Present | Sensei: Ulf Karlsson

Shorin-Ryu/Shinkoten Karate | 2010-Present: Yondan, Renshi | Sensei: Richard Poage (RIP), Jeff Allred (RIP)

Shuri-Ryu | 2006-2010: Sankyu | Sensei: Joey Johnston, Joe Walker (RIP)

Judo | 2007-2010: Gokyu | Sensei: Joe Walker (RIP), Ramon Rivera (RIP), Adrian Rivera

Illinois Practical Karate | International Neoclassical Karate Kobudo Society

Link to comment
Share on other sites

What you're describing would be akin to an ude-makiwara, but without any spring action. You can use it for conditioning, if you're careful, but it's not really a makiwara. A better bet would be to build a proper makiwara on a platform, that way it's moveable and not permanently bolted to the floor or anything.

I second Wastelander's recommendation!!!

Karate no Michi! :karate:

Godan in Ryukyu Kempo

Head of the Shubu Kan Dojo in Watertown, NY

(United Ryukyu Kempo Alliance)

Link to comment
Share on other sites

its been a slow process (almost a year) but our new addition of a home dojo (hojo) is coming along.

I was also looking into a Makawara. I saw the wall mounted ones and wondered about them but I have the floor space. I can mount it in the corner of the dojo. My concern more was height. I am 5'2" and my husband is 5'10".

I more want it for feedback on proper technique. Any suggestions? I rather buy it if possible only bc my husband's time is taxed with building this new space among other things and if I ask him to build one more thing he may want a divorce :-) lol

I also considered removing the pad to an old standing bag and just wrapping the rope around it?

Link to comment
Share on other sites

  • 3 years later...

I made a makiwara using 2 pieces of 2'x4' 3/4" plywood, need 2 pieces because 1 piece of plywood will bend when the makiwara is hit while you are standing on plywood.

Upright post is a 4x4 fence post from big box home building supply store cut on an angle lenthwise to give tapered shape. Attach pole to plywood with a fastener for attaching fence post to cement slab at home supply store. Uses 4 small bolts. You stand on the plywood and punch the pad. It is not permantely attached to anything and is easily movable. Look on Utube for videos on making the pad.

This is similar except I atted it to the plywood pieces not floor.

I like this way of attaching the pad as it has more spring/give to it.

Here is another idea.

It is not about being better than someone else, it's about being better than you were yesterday.

Link to comment
Share on other sites

Okay, I can't figure how to post pictures? maybe I don't have enought posts to be able to post pictures? Anyone?

It is not about being better than someone else, it's about being better than you were yesterday.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...