Struggling_Mudansha Posted January 22, 2017 Share Posted January 22, 2017 Ordered a Shureido gi last week. The representative seemed incredibly concerned with gi shrinkage due to my build, so they recommended the top of the line KC-10. I decided to go with their advice since this is my first Shureido dogi, but I'm concerned with a few things:The first being the weight and material. The dojo I train at works us really hard and I'm usually sweating bullets by the end of each session (and I only wear a 10oz.) I'm worried about how hot and restrictive it's going to feel.The second being the shrinkage issue. The representative said it's going to shrink 2 inches in length. I'm really surprised by this because the KC-10 is Rayon and Polyester, with a small amount of cotton. They are also advocating for the KC-10 because they say their cotton gis shrink up to a whopping 4 inches over time, no matter how you wash them. I'm still going to try the gi, but I may end up sending it back to get something lighter or more breathable. I wash my gis in cold water and dry them naturally and this keeps shrinkage to a minimum. It also extends their rigidity (snappiness) quite a bit.What are your experiences? Have you ever had a Shureido gi shrink 4 inches? Is there a way to keep shrinkage to a minimum if I decide to go with one of their 100% cotton gis? Link to comment Share on other sites More sharing options...
Spartacus Maximus Posted January 23, 2017 Share Posted January 23, 2017 The best idea to deal with shrinking cotton dogi is to buy one size or size and a half bigger than needed. That way it will still fit comfortably even after it shrinks. Personally I have a preference for pure cotton canvas so that is what I do. Also never use harsh detergents and wash in cold water. Avoid dryers and only hang dry. There isn't much else to do to make sure a gi lasts as long as possible. Link to comment Share on other sites More sharing options...
LLLEARNER Posted January 23, 2017 Share Posted January 23, 2017 Stay out of the pool! "Those who know don't talk. Those who talk don't know." ~ Lao-tzu, Tao Te Ching"Walk a single path, becoming neither cocky with victory nor broken with defeat, without forgetting caution when all is quiet or becoming frightened when danger threatens." ~ Jigaro Kano Link to comment Share on other sites More sharing options...
JR 137 Posted January 25, 2017 Share Posted January 25, 2017 My K-10 shrunk quite a bit during the 4 years I owned it. It only shrunk length-wise, not width, for what it's worth.However, I always washed it warm and machine dried it. Every time. Thinking about it, it may have been 4 inches.I warm washed and machine dried my K-11 about 5 times when I first got, before alterations. It's still a bit long, which I can live with. When I first tried it on, my wife laughed and said it looked like a dress. She was right.I now was all my gis cold and hang dry. My wife dried my other 2 gis a few times, and the jackets get shorter every time. Doesn't happen when I hang dry them.Only drawback to hang drying is the material feels a bit rough. I'm fine with that though. If I want to feel all nice and snugglie, I'll machine dry it for a few minutes. No-heat machine drying might be fine, but I can't be bothered. Link to comment Share on other sites More sharing options...
Struggling_Mudansha Posted January 25, 2017 Author Share Posted January 25, 2017 Just got the Shureido gi in earlier today; it was way too long. The representative put clips on to show how much it'll shrink and I don't think it'll be enough.I may just have to nuke it in the washer/dryer. However, that's go wear it out some and I like the feeling of a brand new gi, slightly too big or not.That's why I'm asking if it's possible to prevent a gi from shrinking at all, because I may have to order a custom gi to fit me right. Link to comment Share on other sites More sharing options...
Struggling_Mudansha Posted February 12, 2017 Author Share Posted February 12, 2017 Decided to trade the KC-10 back for a K-10. I made this decision so I could possibly get the cotton to shrink enough to my size. After multiple attempts of nuking it in hot water and the dryer on high, the length went from 33 inches to 31 inches and stayed there. I've decided to sell the gi online since I voided the return policy by washing it. Once it sells, I'm going to call Shureido USA and talk to them about ordering a custom gi (hopefully the process won't be too long or painful). Link to comment Share on other sites More sharing options...
JR 137 Posted February 12, 2017 Share Posted February 12, 2017 I have no experience with the KC-10 nor any other blended gi. Every cotton gi I've owned shrunk quite a bit at first, then slowly continued for some time. Most notably the jacket length. I used to think I was gaining weight because the jackets were getting shorter. Thankfully it wasn't the case. Link to comment Share on other sites More sharing options...
Struggling_Mudansha Posted February 12, 2017 Author Share Posted February 12, 2017 I have no experience with the KC-10 nor any other blended gi. Every cotton gi I've owned shrunk quite a bit at first, then slowly continued for some time. Most notably the jacket length. I used to think I was gaining weight because the jackets were getting shorter. Thankfully it wasn't the case.I'm sure the K-10 would've shrunk to the correct length over a period of time, but considering how much I washed it, it would've probably taken a while. Plus, there were some dimensional issues that I don't think shrinkage would've fixed (the shoulders were too big, the chest area was too wide, pants inseam was too long, the waistline was too wide, etc.)I just hope a custom gi order will fix these issues and I can keep shrinkage to a minimum. Link to comment Share on other sites More sharing options...
Nidan Melbourne Posted February 13, 2017 Share Posted February 13, 2017 When I ordered my Seishin and it was too long, I went to a seamstress to get it taken up but asked them to provide me with any material they removed in case of this exact type of reasoning. But it hasn't shrunk in the time i've owned it. Link to comment Share on other sites More sharing options...
sensei8 Posted February 13, 2017 Share Posted February 13, 2017 When I ordered my Seishin and it was too long, I went to a seamstress to get it taken up but asked them to provide me with any material they removed in case of this exact type of reasoning. But it hasn't shrunk in the time i've owned it.Is it possible, and I'm only guessing, that the gi was made with pre-shrunk material, if there's such a thing?!? If so, then that might be why your gi hasn't shrunk. **Proof is on the floor!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now