FinalHope Posted March 9, 2003 Posted March 9, 2003 Cheap 'N' Easy Nunchakus By FinalHope Materials: Thick Rod or dowell, wooden 2 feet of rope Procedure: Hold your forarm vertically in front of you. Make a fist. Put the dowell up next to it, and mark about 1/2 inch below your elbow. Measure that mark and reproduce it on the other end. Cut the sections. You should now have the rods for the nunchakus. With a meduim bit, drill about 3" into the flat end of the rods. Then, drill from the curved part down into your original hole. Fish the rope through their, you may need to use needle nose plyers to get it out. Tie your knots and viola, your a ninja. j/k Personally: I used 15 1/2" sections of Fir and about 12" of layreete rope, with about 7" in between the rods. Build time was under an hour.
Recommended Posts